Electricity is the future. It’s been that way since Nicola Tesla. It is just human kind evolving the world around them. Barely Davidson, this week, has helped to prove this.
The LiveWire, which most of us thought would flop, has boomed! A week ago Harley announced they would be shutting down and fuel powered production for two weeks.
This was caused by a crappy supplier. They sold Harley Davidson inadequate parts. These parts went on a lot of the 2022 bikes. The company then told Harley they did this. You would think their stock would tank.
It didn’t fall! It is on the way back up! How? They stopped production of what we all thought were their top products. Turns out, that’s now the electric LiveWire!
The most recent shipment of the LiveWire motorcycle, motor means run by electricity, if you didn’t know, sold out in 18 minutes! They flew out of every dealership! 18 minutes!
A lot of people have decided to give up on the classic V-Twin, and make the leap to electric! This is securing Harley’s place in the electric motorcycle future! 18 minutes, and they sold all of them! That’s impressive!
Harley is chasing the future, and it has no fuel! That’s all I got for now! As always, thanks for reading! It’s a small website, please give it a share!
Over the weekend, I visited the Best of Both Worlds Bike and Car Show. Below are the bikes of this event! If you get a chance to go to this event, go!
The people putting on this event, they even put up a mass amount of tents for the visitors! There is food everywhere! You can buy anything that can be cooked on a grill, and Starlite keeps their concession stand open!
Unfortunately, I couldn’t stay for the racing, but if you want to see a fast bike, this show is for you! I’m not going to type much more, because of the mass amount of pictures! This wasn’t even all of the bikes that showed up!
How about a quick how to? Here you will find how to wrap pipes, the pros, and the cons.
Use dishwashing gloves. That shit will itch you to death. It is a very fine fiberglass.
Then, wrap it from the bottom to the top. This will make it lap like a roof, top over bottom, and water won’t get in. Your pipes won’t rust.
If you dont use the silcone, you screwed up. Your wraps will fall apart, and discolor from the sun and water, very fast.
USE THE SPRAY SILICONE! REAPPLY IT EVERY NOW AND THEN! IT WILL MAKE THE FIBERGLASS LAST LONGER! The wraps above, they were black. Without the spray, this will happen, fast.
SPRAY SILICONE ON THE WRAPS! HEAT THE PIPES UP, SPRAY IT AGSIN. SILCONE WILL SOAK INTO THE LAPS THIS WAS, SEALING THEM UP. SPRAY IT AGAIN. This is a pretty big Pro for wrapping your pipes. It helps keep your pipes less rusty.
Pros, less rust. Cons, it will rot. It will get on your leg, and it will itch. Thanks for reading!
A trick… unroll a roll of black. Lay it in the sun for a couple weeks. It will evenly turn a lighter shade of black. Use it and a new roll of black. Now, wrap which ever color you want
I dont care what it is, ill ride it! This thing hits 20mph! This is the Super Ride 1000, 1000W eletric unicycle! The future is awesome!
Why the new DUI ride? It is simple. There is no laws on this thing! No insurance, no tag! Being street legal, that’s another question. It has lights, is built to be safe, so I don’t see why anyone would stop you. Mopeds were the DUI ride, but the police finally stopped that.
A unicycle! Nobody can really ride a unicycle! Not true! Look at the size of the tire! This thing is wide! The Super Ride isn’t a unicycle with a bike tire! This isn’t that stand on electric unicycle, that looks cool, but looks hard to ride. Jump on and go!
Look at the build on the frame. This thing is strong. 280lbs! A nobby tire, my hunting stand, my crossbow, and myself, and I’m silently headed to my hunting grounds! If you can walk it, it looks like it will go! I see a lot of use for this.
Events where officers have to walk everywhere, this would be perfect to keep them rested to do their job. 280lbs limits would allow for a lot of gear! By the time everyone has had too many beers, he is not warn out from walking. This would be great to police the man drags in a lot of Beach towns! Then it is electronic! He is very very sneaky!
Postal workers! Man, put a hitch on it, hook the cart to the back, and head off! The $1699 price tag would be justified in just a little while of saved paid hours! Also, less knee surgery…
This is an awesome little ride! A toy or tool, and efficient with a 45 minute charge time! That will get you 15 miles! That’s to the store and back, easy! Class, mom’s, where ever! Yes, even the bar…
What a cool machine! You can get your’s from X-Offroad! They offer free delivery, and an after purchase discount for reviews! That’s all I got! I hope yall enjoyed this!
Over on Facebook, I take request for articles, stories, and such. The challenge is enjoyable, and the knowledge is priceless. The question was from Greg Henderson. He would like to know how the company, and bike got the names.
Challenge accepted! Here you will find the answer to Greg’s questions, and more. This is basically a complete histroy of Indian, up to today.
Thanks for the request, Greg! This gives me a big opportunity to cancel some myths, and tell some histroy. There is a lot of confusion in the American motorcycle histroy. This will answer your questions, and shed some light on some facts.
First, the name. By today’s standards, we’ll some people of today’s standards, it should be deemed as racist. That is wrong. Indian motorcycles took the name Indian after the American Native, at the time, known as the American Indian. This was the only name for the entire first people of America.
Beings the Native were first, and Indian was America’s first motorcycle company, they honored them with the names. The Scout was the biggest and baddest of the 1920s, and made up a lot of the Pacer and Cafe racer scene. So, it was a fitting name. I scout hunted down their pray, and so would this bike.
A lot of people think Harley was America’s first motorcycle company, this is not true. Indiand was built in 1897 by a man named George Hendree loved to race. He met a racer who had built his own pacer. Hendree would take the racer, and bike, back to Hendree Bicycle company, and Indian would be born. By 1901 the Indian Motorcycle would be in production. It would be another 3 years before the first Harley Davidson rolled off the line.
Hendree loved to race, and would build his bikes to be the best. By 1911, just ten years after opening his doors, he had become the top of the Isle of Man TT Races. He would have three top finishers, and win the race.
We’re people really small enough for that little bike to carry three of them? By 1912 Indian had became America’s first motorcycle sold around the world. They would continue to be “America’s ” motorcycle until July 11, 1914.
Indian Motorcycle Manufacturing Co. Would join the war efforts, along with Harley Davidson, and many other Americans motorcycle manufacturers. This is not to say that Indian was the first War Bike.
Harley Davidson invented the first Murdercycle. The United States Military would use it in 1916. They would force Panco Villa back into Mexico with it. Harley was the first American military motorcycle.
1916 would also bring a great change to the Indian Motorcycle Manufacturing Co. I like to think he was a racer, and a biker. He knew the freedom we feel, hell, he made it American, and could not watch his company go to war. Racing and riding isn’t about these thing. So, in 1916, after carrying his company to the top, George Hendree retired.
Indian Motorcycles would enter into WW1 ready for war. They would fight in Europe. Because they were shaft driven, unlike Harley, they would fight in the Desert Theaters of World War 1.
Another advantage over the Harley was the foot shifter. The Harley of the time had a handshift. Freeing up hands in war is a smart thing.
Government money is good money, but never forget where you came from. Indian Motorcycles would do just that. As Hendree left, they turned all their attention to the war efforts. They would build the bikes, and start schools to train soldiers to repair them.
Harley Davidson would also join the war efforts, but eould not forget where they came from. Unlike Indian, they would continue to focus on customer sells, and products for the public. Unfortunately for Indian, the war would only last 4 years.
After the war, Indian would find it hard to get back the dealers, after they left them out to dry. They would get some back with the Scout, but not many. Harley had picked up a lot of them, and took care of them during the war. Harley Davidson had started to become the American Peoples’ Motorcycle.
Lucky for Indian, one of the best motorcycle riders of the time, to hear Hollywood tell it, road their motorcycle. In 1927, Steve McQueen would ride Indian back into American hearts and minds. He would continue for some time.
In the 30s, Indian started designing for style and comfort. They designed a lot of the looks and styles people remodel bikes to, today. This is a bobber, by today’s definition. I am personally finishing up a bike in this style. The styles of these bikes are why we are talking about them, now. Then old Indians have the looks…
Throughout the 1930s, Indian would regain their popularity with the American people, and knock a decent dent in Harley. But, as you know, in 1942, we went back to war.
Indian would go on to repeat the same mistake. They would quickly retool their factory for their new Murdercycle. They would call it the Indian 841. This bike eould basically be the end of Indian Motorcycles Manufacturing Co. At least the first nail.
Let me introduce to you, the 1940 Harley Davidson Model UL Murdercycle! Hatley learned a lot during WW1. Things like there were two markets for motorcycles. One civilian, one government. Indian retooled the same factories. Another nail.
Basically all Indian could put out was a badass bobber, painted green. Harley, on the other hand, they were in the business of war machines, and had been for most of the companies life. Indian’s was not able to compete. Nail…
On September 2nd, 1945, after the napalm was lit, and the atomic bombs were dropped, the war ended. The bombs America dropped, they were not only overseas. As the war ended, Indian would count their losses.
During the war, Harley Davidson sold 88,000 motorcycles to the war effort, making millions. Indian had no chance. They had shaft driven bikes, that is all. The machine gun side car won the war, for Harley.
Indian, being a shaft driven bike, still had a place in the war. Unfortunately it was a very small place. They only sold 1000 motorcycles. Harley was officially the American Military motorcycle.
Indian would fight hard over the next few years. Their late 1940s product line would include some of the most beautiful bikes ever made. They would even go back to their roots, and try to get into racing.
Still, after the war profit and losses, Indian stood no chance. Harley was able to keep their dealerships during World War 2. Indian failed at this, by chasing government contracts. Nails…
By the 1950s Indian was struggling to make it. They were redesigning everything they could. This made a lot of the 50s models unwanted. Those nails…
That’s a beautiful bike, but that seat? Indian was losing their touch, races, and customers. Sales slumped. People wanted Harley. It had nothing to do with performance, or looks.
Do you know what happens to military surplus when it no longer has a use? It is sold to Hollywood. This mass influx of Harley Davidson motorcycles caused the mass influx of biker movies. Indian lost McQueen to Harley back in the late 30s. They had no place anymore. Yes, I know the picture is from 1963, but it shows my point. The final nails…
In 1953, Indian would take their last swing at a motorcycle for the American people. Unfortunately, their chosen path would not allow the to make it. They failed at keeping up with the people. They failed at engineering for the military. 1953 would be the final nail. Indian would close their doors, ending the first American motorcycle company.
They would go bankrupt. Those nails, it wasn’t a coffin that we built. We built a resting place, a place for Indian to hibernate. For almost 60 years, Indian would sleep. Waiting for someone to come and wake her up. Some tried, but they all failed.
As AMF did for Harley Davidson back in 1969, and Hero Motorcycles is doing for Harley in India, someone stepped up to carry Indian into the future.
In 2011, Polaris closed their own motorcycle line, Victory Motorcycles. They would bring back the American classic, Indian Motorcycles. If Indian is lucky, one day they might, once again, stand as their own American company. AMF worked for Harley. Maybe Polaris will work for Indian.
That’s all I got for today! Thanks, Greg, for the idea, and thank you all for reading!
And ladies, as always, you are first. Please let me show you our new pony tail holders! They are all handmade by Kris Kay!
Now that is biker lady style! See, Kris was raised by his mother and sister. He was taught crafts, make up, and even how to do hair! He finds himself paying attention to the fashion that he is around.
Look at that, he made it so you could wear it two ways! That’s good designing! After setting off on ride after ride, Kris started noticing pony tail wraps, and other products.
He seen this as a leather tube sock, stuck in a lady’s hair. He did not find this appealing. So, Kris started thinking. How could he change the cocksock looking wrap?
Kris has always been into fashion. As a teen, he would work all week, delivering pizza, and would spend it all on one pair of pants! He has always cared about how he looks, and even those that he dates, even going as far as to shop for her clothing.
Kids these days… Their nose rings. Their crazy colored hair. What are they thinking? Whatever it is, Kris was thinking it 20 years before them.
20 years is a long time. Kris found himself on many adventures in life. Music played a large part. Concerts were something he loved. It didn’t matter if it was Luke Bryan, or Mushroom Head, he noticed that leather crosses all lines.
Then, he seen this vacuum house end that someone stuck in this pour lady’s hair! You can tell man designed this horrid article of clothing. Kris thought about his life. He thought about he how he designed clothing for men, has artist making leather products being designed for men, but had nothing to offer the ladies.
Seeing the terrible attempts at styles, and the rubber band, pony tail holder, he decided he would sit down and desisomwthing nice enough for a lady to feel pretty wearing.
After a few tries, and asking around, Kris found a style and design ladies enjoy! So now A Biker’s Life For Me has its first installment into our leather line! Not all of them will be this way! We have three other designs, waiting to be finished up! We will be offering pink stones, rose buttons, and other great designs!
Thanks for reading! I hope you are looking forward to seeing what we all have to offer! Stay safe, and have a blast!
These baggers, I like them. They remind me of Roman chariots, for kings. These are the top of custom bikes, in my opinion. They guy that built it, I give him mad respect.
These big wheels take a lot more to build than one of my bobbers. My bobbers, I can make a mistake, and leave it as character. You make a mistake on these big wheels, you better fix it. This is not bobber money!
Myself, I say I build bobbers. I have not had the chance to move on. Of course, I have put some bikes back to factory, but that doesn’t count as a build.
Check http://www.abikerslifeforme.com . You will find a whole page for a bagger build. There is one coming up, and I’ll be part of the build. We will be moving up!
If you dont like, or build baggers you shouldn’t really be saying you build bikes. Baggers are the top. Every club almost requires them. You wont find many clubs allowing a bobber, Cafe racer, or anything else, in. If you want to make a living, you better be in with the clubs.
Real quick, thank you guys for stopping by here. Truthfully, support is had to get. A Biker’s Life For Me is growing everyday. Yall try not to forget that only one person is doing this. Help was not possible to find.
If you can, stop by the sticker gallery and pick up a sticker. They are just $8. Every little bit of support helps. I’m trying to upgrade my site to have a serious store, to sell bikes. It isnt free. Selling stickers is going to get me there! Thanks for reading!
Barnyard! We find ourselves here a good bit! To be completely honest, if it is a swap meet, jockey lot, flea market, or auction, im happy to be there!
Over in Greer South Carolina sit rolls and rolls of metal buildings. They are filled from everything from cockrings, to a mechanical Jesus, that sings. It’s a thrift heaven!
The first cool spot I found, Isaac’s Works. They sell biker rings, whips, and other items for bikers. Not pictured, they also etch glass! They had some nice work, and I wish I would have got a picture!
Now, if you need a nice whip, bracelet, ring, or etched glass, they have it. One of my favorite items is that black and red whip! Isaac Works is a great designer of these items!
Right beside Issac Works , is S&M Customes! S&M is a biker hook up! You can get some decent vest, shirts, patches, and stickers. They also have a small collection of saddle bags. Their vests are worth swinging by and checking out.
S&M Also offers custom shirts and license plates! They will also do decals, shirts, and anything else you need! S&M Graphics and More should be one of your main reasons for the drive up to Barnyard!
Around the way is the top reason we make the ride to Barnyard! Reaper’s Motorcycle Apparel! Here you are going to find a little but of everything. It really doesn’t matter what kind of biker you are, Reaper’s has something you want!
This front rack, I would spend a lot of money right here, if I had it! There are all types of vest, some vintage. T-shirts, and a lot more. Look at the bottom of the rack, and all the way to the back. See that sports bike racing suit? Like I said, something for every biker!
Look at all them bars! I want to look at every set! Then, I can’t stop looking at the seats! The bags! The bags! Look at that collection! Is that a cup holder for my motorcycle? DON’T TURN AROUND!
You did it anyways! Look at all the shine! It looks like a pile of mufflers! It is Harley mufflers, pegs, decorative pieces, and a lot more. This one table is worth a fortune!
Over around the corner, you will find boots. His boots are nice, and a reasonable price. Everything in here is reasonable. You will also find bandannas, pony tail ties, and gloves. Reaper’s even have heated gloves. Then, his helmet collection is amazing. Being as close as Barnyard in to N.C. pick up a nice $25 helmet! Yep, $25! That’s what I payed. I also got a pretty, decorated, lady biker helmet for $40!
So, when you find you and the guys heading up 101, going through Greer, swing by Barnyard! You won’t only find biker items. They have a little of it all. Try the Tacos!
Thanks for reading! I hope you enjoyed our visit to Barnyard, and found some great information! Yall be safe, and have a goodun!
Not that Nova, this is a motorcycle project. The Novas pictured below, these are the Novas Im talking about.
The V twin bolted on it, is designed and built by Porsche. They are either 4 cylinder or 6, from 550 to 1000ccs. I mean Porsche built it. I should not have to tell you that it was built for speed and performance.
A Nova bike, when you order parts, you ordered parts for a Nova, and the year it was built. Almost every part was interchangeable, all the way down to the crank case, with all the bikes. This would change the entire bike market. Parts would be easy to find, and cheap.
Nova was a game changer, in so many ways. A Porsche motor on my 1978, the year I was born, Bobber. Why hell yes, I want that. I want a super fast cruiser that I can sling around some curves!
Unfortunately, dreamers get old. They retire, and some people replace them with people that only care about profit. They would end the Harley Davidson’s Nova program before a bike was even built. The Nova would be pushed aside for less performance and luxury. A comfortable cruise. They guy who got the job, was scared to go fast, if you ask me. They also didn’t like the shaft drive or small tanks.
So what do yall think? Could Nova had pushed Harley up, instead of the constant drop in market they have seen? Now, all I see saving Harley is a new market. Everyone with a Harley wants a Harley trailer. They want a Harley side by side. The want a Harley 4 wheeler. Almost every other motorcycle company has car factories. HD doesn’t have car money. They need something else. What do yall think it should be? Maybe it is the new super charger!
There is one thing that people does that I dont like, and you wont find on my bikes. I mean if you like it, go ahead.
Fake oil tanks. I dont like the look. I dont the idea of adding weight. I want to look through the bike. I want to find ways to hide my wires, that haven’t been done.
Here are two of my ways. The below bike is a 1998 Suzuki Intruder. It is a bobber, obviously. I really don’t like anything else. If you look behind the muffler, you will see the battery. It is well hidden, and factory. That is a plus.
You run the wires up the center of the frame, and to the bottom of the seat. The factory Intruder seat, is awesome. It is what you see. The bottom sits up on two plastic legs, about 3 inches. You hide everything electrical under this seat, leaving the hole to see through, and not adding weight. You can add a pan under the seat and bolt to that, of drill and tap the bottom of the seat to hold your electronics.
Above is a 92 Shadow 600. Most people add a fake oil tank, a big ugly box, or leave the factory set up. For me, that is not what im after. Bobbers are empty. They don’t have fake metal parts, added. There is no point in doing this.
By adding your own coolant bottle, you can hide all of your electronics. Look behind the chain. Do you see the coolant over flow? It is the off white box. You can barely see it.
It just so happens, that is a little bit bigger than a battery. A nice 9mm bolt, bolts into the frame at this spot. You can make a thin metal box, thin is light, that bolts up, and hooks over the bar that runs across, and hide all of your wires. The box is safe, if the plastic coolant tank can make it. This will leave the large hole, which I prefer, in your bike. It will be as hard to see as the factory coolant tank.
Doing these bikes this way, in my opinion, is a cleaner, faster, look. It sticks to the idea of a bobber having all the extra removed, and not adding. I like the oil tank look on bikes that need an oil can. For me, modern bikes shouldn’t have them.
Soon, we will have an article about building this battery box out of an ammo can! Thanks for reading! Please give us a ahare!